How should the bathtub and toilet be installed? Expert: Waterproof and space configuration are the most important

Have you ever had such experience? After going to the toilet and getting up, did you accidentally hit the wall or washbasin next to it? Or not long after the bathtub was installed in the master bathroom, the wall outside the bathroom felt a little damp,https://www.shineful.com.tw/ma21.htm, and even the paint floated?

These small problems may have little impact on life, but the quality of living seems to be better, but what should we do? Dai Yunfa, chairman of the Construction Safety Resume Association, said that all these problems must be returned to the source, because the foundation of construction safety is to have excellent planning, design and construction quality, as well as interior decoration. Dai Yunfa said that before choosing the bathroom equipment we like, we should include the size of the space as the basis for selection, and plan the space configuration and pipeline location beforehand.

The basic objects of sanitary equipment are washbasins, toilets, showers or bathtubs. The sanitary space may not be large, but the configuration must comply with a principle that is ergonomic and keep a comfortable working distance between the equipment. Buying a house is most afraid of falling prices! Start from the value-preserved house 🎯 join and watch Beware!! Your property is sold at a low price!! Speculators earn 5.8 million in 3 minutes? Don't take the bait! Intermediaries colluded with speculators and became thugs! The black-hearted technique is open. When installing the bathtub, place bricks on the floor.

The bathtub should be placed on the bricks and then fixed with cement mortar.

Not only can the bathtub be effectively stabilized, it can also raise the height of the bathtub so that it will not feel low when bathing. Photo courtesy of Dai Yunfa. Zhang Mingquan, Director of Works of Jinyan Design, said that the location of the toilet should be centered on the manure pipe, and the distance from the center of the manure pipe to both sides must be at least 35 cm. It is recommended that it be more than 35 cm. There is less oppression at times. In addition, the side width of a person is about 20-25 cm, and the shoulder width is about 52 cm.

Therefore, if the front of the washbasin is a walkway, when configuring the bathroom line, it is recommended to leave at least 60 cm for people to pass through; and the toilet Don't get too close to the wall. The distance from the side of the toilet to the wall must be at least 20 cm. In addition, bathtubs and showers are the most frequently exposed to water in the bathroom space. Therefore, many people know that waterproof measures must be taken. However, why some people’s bathrooms in the homes of some people still feel damp on the outside walls and Is the paint floating? Zhang Mingquan explained that it is very likely that when the bathtub area was constructed, the gravel or mud sand inside was not cleaned first, and it was put directly into the bathtub. In this way, even if the ground has a slope of drainage, it may still be blocked by mud and sand.

The water inside cannot be drained smoothly, causing water accumulation. Over time, not only will the waterproof layer be damaged, but also wall cancer will develop due to water absorption. Zhang Mingquan suggested that in the bathtub construction, the floor of the bathtub should be installed with a drain slope to allow water to flow in the direction of the drain hole, and a non-woven fabric should be added to the inner corner to confirm the drain slope with a level before applying a waterproof layer. . When installing the bathtub, also pay attention to the bathtub drain pipe must be placed, when the pipeline is placed in the ground drain, the position should not be full, and some space should be reserved to prevent water on the ground and allow the water to drain smoothly. Because there is weight when people step on the bathtub, in order to avoid displacement of the bathtub, it is recommended to lay bricks on the floor when installing the bathtub, then place the bathtub on the bricks and fix it with cement mortar. Not only can the bathtub be effectively stabilized, it can also raise the height of the bathtub so that it will not feel low when bathing. Dai Yunfa said that as long as you pay more attention to the details when carrying out the renovation project, you can avoid many unnecessary troubles or renovation costs in the future. As for the overall safety of the building, structural design must be used to reduce building insecurity factors. For example, the 4.0 new thinking of innovative buildings and the automation of steel processing procedures can solve human errors and ensure the quality of construction.